This compact blood pressure monitor delivers the accuracy and precision in half the size. Its compact design is ideal for travelling. Features the free BPiQ app that is available on iOS and Android devices. The measurement data can be transferred automatically, infinite storage is available and measurement data can be shared with a healthcare provider. Product information is provided by the product vendor. This content is a summary for informational purposes only and does not have all possible information about this product. It should not be used as a substitute for advice from health care professionals, as this information alone does not assure that this product is safe, effective, or appropriate for you. For more detailed information on this product, including reported and possible side effects and contraindications, refer to the manufacturer's monograph, or speak with a health care provider.

• 3X Averaging • Irregular Heartbeat Detection • BP Assessment Indicator Included • Blood Pressure Monitor • Wide Range Cuff: 24-43 cm (9.4” – 16.9”) • Instruction Manual
After the cuff has been appropriately positioned, the measurement can begin. NOTE: Ensure you are in the measurement mode you want (see section 3.1 to select 3X Averaging mode or Single mode) 1. Press the START/STOP button until all the symbols appear on the screen. You will see “bt” flashing on the display. At this time you can connect the app with the monitor (see section 3.6) or press the START/STOP button again and the monitor will continue with a measurement, ”nor” or “tHr” will appear on the display for a second to remind you what mode you are in. You will hear 2 short beeps and after “0” will flash for 2 seconds. The pump then begins to inflate the cuff. The increasing pressure in the cuff is shown on the display. 2. After the suitable pressure has been reached, the pump stops and the cuff gradually deflates. The cuff pressure will then be displayed. In case the initial inflation is not sufficient, the device automatically re-inflates to a higher pressure. 3. When the device detects a heartbeat, the heart symbol on the display starts to flash and you can hear a beep for every heartbeat. 4. When the measurement has been completed, you will hear a long beep and the systolic, diastolic and pulse rate will appear on the display. 5. The measurement readings remain on the display until you switch off the device. If no button is pressed, the device switches off itself in 3 minutes.